取得科研成果情况
在国外材料科学英文专业期刊上已发表SCI和EI收录论文100余篇,以下是部分发表论文
1. Deformation twinning and twinning-related fracture in nickel-base single-crystal superalloys during thermomechanical fatigue cycling, Acta Materialia, 67 (2014) 45-57. (IF: 4.465)
2. Atomic scale interfacial and compositional characteristics of the σ and γ phases of Ni-based single-crystal superalloys, Acta Materialia, 60 (2012) 6631-6640. (IF: 4.465)
3. Martensite structure in Ti–Ni–Hf–Cu quaternary alloy ribbons containing (Ti,Hf)2Ni precipitates, Acta Materialia, 58 (2010) 3751–3763. (IF: 4.465)
4. Thermomechanical fatigue mechanism in a modern single crystal nickel base superalloy TMS-82, Acta Materialia, 56 (2008) 2975-2987. (IF: 4.465)
5. Deformation mechanism of martensite in Ti-rich Ti-Ni shape memory alloy thin film, Acta Materialia, 54 (2006) 1185-1198. (IF: 4.465)
6. The Effect of Lattice Misfit on the Dislocation Motion in Superalloys during High-Temperature Low-Stress Creep, Acta Materialia, 53 (2005) 4623-4633. (IF: 4.465)
7. On the Ti2Ni precipitates and Guinier-Preston zones in Ti-rich Ti-Ni thin films, Acta Materialia, 51 (2003) 3121-3130. (IF: 4.465)
8. Slip geometry of dislocations related to cutting of the g¢ phase in a new generation single-crystal superalloy, Acta Materialia, 51 (2003) 5073-5081. (IF: 4.465)
9. Structure of martensite in sputter-deposited Ti-Ni thin films containing GP zones, Acta Materialia, 49 (2001) 3001-3010. (IF: 4.465)
10. Microstructural evolution inside the stess induced martensite variant in a Ti-Ni-Nb shape memory alloy, Acta Materialia, 48 (2000) 1409-1425. (IF: 4.465)
11. The structure and mobility of the intervariant boundaries in 18R martensite in a Cu-Zn-Al alloy, Acta Materialia, 47 (1999) 2125-2141. (IF: 4.465)
12. The substructure and boundary structure of the deformed 18R martensite in a Cu-Zn-Al alloy, Acta Materialia, 47 (1999) 3497-3506. (IF: 4.465)
发明专利:
1. 一种低温锂离子电池负极膨胀石墨,专利号:ZL 201310719068.0
2. 原位石墨化碳包覆磷酸铁锂正极材料的制备方法,专利号:ZL201310504316.X
3. 一种异价金属盐掺杂的二氧化钛纳米管的制备方法,专利号:ZL201310503066.8
4. 一种低含量高石墨化碳包覆磷酸铁锂,专利号:ZL201310719766.0
5. 一种磷酸铁锂电池的低温电解液,专利号:ZL201310504318.9
承担科研项目情况
1. 山东省自主创新及成果转化专项(2014ZZCX05501):高能量密度锂离子动力电池研发及应用示范,200万元,课题负责人
2. 国家自然科学基金(51471098):镍基单晶高温合金添加Ru对TCP相界面附近溶质元素输运特性影响的原子尺度研究,85万元,课题负责人
3. 国家自然科学基金(51271097):多元素交互作用下镍基单晶高温合金位错芯的结构和位错芯区的应变场研究,78万元,课题负责人
4. 国家自然科学基金(51071096):镍基单晶高温合金热机疲劳过程中裂纹扩展微观机制及相关孪晶形成机理研究,43万元,课题负责人
5. 国家自然科学基金(50971078):先进镍基单晶高温合金中强化元素行为及其与微观缺陷交互作用的纳米尺度研究,34万元,课题负责人
6. 国家博士后科学基金特别资助:镍基单晶高温合金中Ru及多种合金元素间交互作用机理的纳米尺度和原子尺度研究,10万元,课题负责人
7. 国家博士后科学基金面上项目:高性能活塞用铝基复合材料的高温疲劳行为及微结构演变研究,3万元,课题负责人
8. 国际合作(Komatsu Co. LTD, Japan)项目:The investigation of optimum heat-treatment and microstructure of floating seals about 15Cr3MoV and Nihard, and the investigation of the relationship between a sliding performance of floating seals and the microstructure, and the modeling of the sliding phenomenon,40万元,课题负责人
与国内外联合培养研究生情况
国外:
1. 每年委派1-2名硕士研究生和博士研究生到日本国家材料研究所(National Institute for Materials Science, NIMS, Tsukuba, Japan)联合培养
2. 每年委派1-2名硕士研究生和博士研究生到日本产业技术综合研究所(National Institute of Advanced Industrial Science and Technology, AIST, Tsukuba, Japan)联合培养
国内:
1. 根据课题需要和学生意愿,每年委派1名博士研究生到北京工业大学固体微结构与性能研究所联合培养
2. 根据课题需要和学生意愿,每年委派1名博士研究生到中国科学院金属研究所(沈阳)或中国科学院物理研究所(北京)联合培养
联系方式
13625313936
联系地址
山东省济南市经十路17923号 山东大学材料科学与工程学院
电子邮箱
jianxin@sdu.edu.cn