|
|
申志康 西北工业大学副教授。主要从事搅拌摩擦焊等固相连接技术的研究。The International Journal of Advanced Manufacturing Technology, science and technology of welding and joining, Journal of Materials Processing Technology, Journal of Manufacturing Processes, Materials Characterization, Materials & Design等国际期刊审稿人。
姓名:申志康
学院:材料学院
学历:博士研究生毕业
学位:工学博士
职称:副教授
职务:
学科:材料科学与工程-材料加工工程
工作经历 Work Experience
2013-2014 加拿大滑铁卢大学 访问学者
2015-2018 加拿大滑铁卢大学 博士后研究
2018-今 西北工业大学材料学院 副教授
学术成果 Academic Achievements
1. Z. Shen*, Y. Ding, J. Chen, B.S. Amirkhiz, J. Wen, L. Fu, A. Gerlich, Interfacial bonding mechanism in Al/coated steel dissimilar refill friction stir spot welds, Journal of Materials Science & Technology 35(6) (2019) 1027-1038.
2. Z. Shen*, Y. Ding, J. Chen, L. Fu, X. C. Liu, H. Chen, W. Guo, A. P. Gerlich. Microstructure, static and fatigue properties of refill friction stir spot welded 7075-T6 aluminum alloy using a modified tool, science and technology of welding and joining. (2019) 1-14.
3. D. Qin, L. Fu, Z. Shen. Visualisation and numerical simulation of material flow behaviour during high-speed FSW process of 2024 aluminium alloy thin plate, The International Journal of Advanced Manufacturing Technology (Accepted: 14 December 2018).
4. Z. Shen*, Y. Ding, J. Chen, B. Shalchi Amirkhiz, J. Z. Wen, L. Fu, A.P. Gerlich. Interfacial bonding mechanism in Al/coated steel dissimilar refill friction stir spot welds, Journal of Materials Science & Technology, accepted (2018/10/13).
5. H. Zhao, Z. Shen*, M. Booth, J. Wen, L. Fu, A. Gerlich, Calculation of welding tool pin width for friction stir welding of thin overlapping sheets, The International Journal of Advanced Manufacturing Technology 98(5-8) (2018) 1721-1731.
6. Z. Shen*, J. Chen, Y. Ding, J. Hou, B.S. Amirkhiz, K. Chan, A. Gerlich, Role of interfacial reaction on the mechanical performance of Al/steel dissimilar refill friction stir spot welds, science and technology of welding and joining 23(6) (2018) 462-477.
7. Z. Shen*, Y. Ding, O. Gopkalo, B. Diak, A.P. Gerlich, Effects of tool design on the microstructure and mechanical properties of refill friction stir spot welding of dissimilar Al alloys, Journal of Materials Processing Technology 252C (2018) 751-759.
8. Y. Ding, Z. Shen*, A. Gerlich, Refill friction stir spot welding of dissimilar aluminum alloy and AlSi coated steel, Journal of Manufacturing Processes 30 (2017) 353-360.
9. A.M. Nasiri, Z. Shen, J.S.C. Hou, A.P. Gerlich, Failure analysis of tool used in refill friction stir spot welding of Al 2099 alloy, Engineering Failure Analysis 84 (2018) 25-33.
10. Z. Shen*, J. Hou, K. Chan, N. Scotchmer, N. Zhou, A. Gerlich, Spot Welding Aluminum 6022-T4 to Galvanized DP600 sheet by Refill Friction Stir Spot Welding, SWMC XVII conference, Detroit, USA, October, 20th, 2016.
11. Z. Shen*, Y. Ding, J. Chen, A. Gerlich, Comparison of fatigue behavior in Mg/Mg similar and Mg/steel dissimilar refill friction stir spot welds, International Journal of Fatigue 92 (2016) 78-86.
12. Z. Shen, Y. Chen, M. Haghshenas, T. Nguyen, J. Galloway, A. Gerlich, Interfacial microstructure and properties of copper clad steel produced using friction stir welding versus gas metal arc welding, Materials Characterization 104 (2015) 1-9.
13. Z. Shen, Y. Chen, M. Haghshenas, A. Gerlich, Role of welding parameters on interfacial bonding in dissimilar steel/aluminum friction stir welds, Engineering Science and Technology, an International Journal 18(2) (2015) 270-277.
14. Z. Shen, Y. Chen, J. Hou, X. Yang, A. Gerlich, Influence of processing parameters on microstructure and mechanical performance of refill friction stir spot welded 7075-T6 aluminium alloy, Science and Technology of Welding and Joining 20(1) (2015) 48-57.
15. Z. Shen, X. Yang, S. Yang, Z. Zhang, Y. Yin, Microstructure and mechanical properties of friction spot welded 6061-T4 aluminum alloy, Materials & Design (1980-2015) 54 (2014) 766-778.
16. Z. Shen, X. Yang, Z. Zhang, L. Cui, Y. Yin, Mechanical properties and failure mechanisms of friction stir spot welds of AA 6061-T4 sheets, Materials & Design 49 (2013) 181-191.
17. Z. Shen, X. Yang, Z. Zhang, L. Cui, T. Li, Microstructure and failure mechanisms of refill friction stir spot welded 7075-T6 aluminum alloy joints, Materials & design 44 (2013) 476-486.
18. D. Qin, H. Shen, Z. Shen, H. Chen, L. Fu, Manufacture of biodegradable magnesium alloy by high speed friction stir processing, Journal of Manufacturing Processes 36 (2018): 22-32.
19. Z. Shen, H. Sui, V. Keer, J. Z. Wen. Effect of Heat Treatment on the Interfacial Bonding Between SiC Coating and Alumina Plate, Surface Engineering, published online: 10 Jun 2019.
20. W. Guo, F. Li, P. He, T. Lin, M. Wan, J. Hou, Y. Wu. X. Liu, Z. Shen. Air-brazed Al2O3 joint with a novel bismuth glass, Ceramics International, 45(12), 15213-15222.
21. H. Chen, X. Ren, W. Guo, M. Wan, Z. Shen, X. Liu, M. Feng. Microstructures and mechanical properties of brazed Al2O3/Cu joints with bismuth glass, Ceramics International, Available online 17 May 2019.
22. 申志康, 杨新岐, 张照华,等. 铝合金回填式搅拌摩擦点焊组织及力学性能分析[J]. 焊接学报, 2013, 34(6):73-76.
23. 王希靖, 申志康, 张忠科. 铝和镀锌钢板的搅拌摩擦焊搭接分析[J]. 焊接学报, 2011, 32(12):97-100.
24. 郑敏, 申志康, 杨新岐,等. 异种铝合金回填式搅拌摩擦点焊缺陷及力学性能[J]. 焊接学报, 2016, 37(8):87-90.
|
声明：本网部分文章和图片来源于网络，发布的文章仅用于材料专业知识和市场资讯的交流与分享，不用于任何商业目的。任何个人或组织若对文章版权或其内容的真实性、准确性存有疑义，请第一时间联系我们，我们将及时进行处理。
|
发表于 2019-9-7 15:56:01
QQ好友和群
QQ空间
腾讯微博
腾讯朋友
收藏
转播
分享
淘帖
楼主