找回密码
 立即注册

QQ登录

只需一步,快速开始

苏州大学材料与化学化工学部材料学院李耀文

查看数: 2250 | 评论数: 5 | 收藏 0
关灯 | 提示:支持键盘翻页<-左 右->
    组图打开中,请稍候......
发布时间: 2017-4-10 10:35

正文摘要:

李耀文,博士,苏州大学教授。2005年在吉林大学化学学院获得学士学位,2010年在吉林大学超分子结构与材料国家重点实验室获得博士学位,随后到苏州大学材料与化学化工学部工作。期间在中科院苏州纳米所陈立桅课题组、 ...

回复

dieluo 发表于 2020-2-25 08:39:03
柔性太阳能电池材料与器件
批准号        51922074       
学科分类        光电磁信息功能材料 ( E030901 )
项目负责人        李耀文       
依托单位        苏州大学
资助金额        130.00万元       
项目类别        优秀青年科学基金项目       
研究期限        2020 年 01 月 01 日 至2022 年 12 月 31 日

zhuanyan 发表于 2019-9-29 08:48:47
报告题目: 钙钛矿太阳能电池的界面工程及稳定性研究
报 告 人: 李耀文教授
单   位: 苏州大学
时   间:  2019年9月26日下午15:30-17:00
地   点:  南京邮电大学材料学科楼4楼413大会议室


报告摘要:
钙钛矿太阳能电池由于其可溶液加工、廉价、高效率的特点有望成为光伏领域的一个新突破口。本报告将重点围绕制备高效率、高稳定性的钙钛矿太阳能电池的关键科学问题进行探讨。具体包括(1)利用有机半导体材料的分子剪裁特性,针对钙钛矿材料不同类型的缺陷态和器件结构发展了高性能界面层材料,明确了构效关系及相关机理;(2)发展了系列钙钛矿晶体可控生长方法;(3)探索了影响钙钛矿太阳能电池的光、热、氧、湿度稳定性的关键因素及解决方案。


报告人简介:
李耀文,苏州大学教授,博士生导师。2005年和2010年先后在吉林大学获得学士和博士学位。随后到苏州大学工作,并先后在苏州纳米技术与纳米仿生研究所陈立桅课题组,美国加州大学洛杉矶分校杨阳课题组,从事博士后和访问学者工作。长期从事有机、钙钛矿太阳能电池材料合成及器件制备相关研究,特别是钙钛矿太阳能电池界面工程及柔性太阳能电池制备取得了一系列研究成果。迄今共发表SCI论文70余篇,其中第一作者及通讯作者在Nat.Commun.,J.Am.Chem.Soc.,Adv.Mater.,Adv.Funct. Mater.,Adv. Energy Mater.等高水平杂志上发表SCI论文40余篇,被引用3000余次,H影响因子31。主持了国家自然科学基金面上项目、青年项目,江苏省青年基金,分别作为项目骨干和苏州大学负责人参加面向能源光电转换重大研究计划集成项目、国际重点合作项目。获江苏省优秀青年科学基金和国家优秀青年科学基金资助。

cangcang 发表于 2019-9-10 17:26:18
苏州大学李永舫院士团队李耀文教授等人报道了提出“靶向治疗”策略来开发高效率和高稳定性的钙钛矿太阳能电池。他们合成了易制备的和疏水的富勒烯衍生物PCBB-S-N,并用它作为p-i-n型平面异质结钙钛矿太阳能电池的电子传输层材料。所得到的钙钛矿太阳能电池不仅具有高于PCBM为电子传输层的器件效率,而且无封装在相对湿度为40%–50%的环境中运行1000小时和在85℃的温度下被加热500小时后性能几乎不衰减。此外,PCBB-S-N作为钙钛矿和PCBM之间的媒介层时,PCBB-S-N依然具有“靶向治疗”效应,同时还可以诱导PCBM生长形成致密、均一的电子传输层。上述成果于近日发表在期刊Adv. Mater.上。

xiaoqiao 发表于 2019-4-16 09:00:22
报 告 人:李耀文 教授
报告题目:高效柔性太阳能电池及稳定性研究
报告时间:2019年4月17日(星期三)下午 16:00
报告地点:兰州大学第二化学楼101学术报告厅

报告人简介
      李耀文,博士,苏州大学教授。2005年在吉林大学化学学院获得学士学位,2010年在吉林大学超分子结构与材料国家重点实验室获得博士学位,随后到苏州大学材料与化学化工学部工作。期间在中科院苏州纳米所陈立桅课题组、美国加州大学洛杉矶分校杨阳课题组先后从事博士后、访问学者研究工作。2014年加入李永舫院士领衔的苏州大学先进光电材料重点实验室。2016年度获“江苏优秀青年基金”。研究工作主要围绕制备高性能柔性太阳能电池的关键科学问题展开,并获得了世界领先的光电转换效率。与此同时,着力发展高稳定性(机械、化学)的柔性太阳能电池材料及器件结构。迄今为止,以第一作者及通讯作者身份在Joule、Nat. Commun.、Adv. Mater.、J. Am. Chem. Soc.、Energy Environ. Sci.、Adv. Energy Mater.、Adv. Funct. Mater. 等高水平杂志上发表SCI论文37篇,多篇论文入选ESI热点、高被引论文。

yangtao 发表于 2018-5-22 08:52:51
A Semitransparent Inorganic Perovskite Film for Overcoming Ultraviolet Light Instability of Organic Solar Cells and Achieving 14.03% Efficiency
Weijie Chen1, Jingwen Zhang1, Guiying Xu1, Rongming Xue1, Yaowen Li1 *(李耀文), Yinhua Zhou2, Jianhui Hou3, and Yongfang Li1,4
  
1 Laboratory of Advanced Optoelectronic Materials,College of Chemistry Chemical Engineering and Materials Science,Soochow University,Suzhou 215123, China
2 Wuhan National Laboratory for Optoelectronics,School of Optical and Electronic Information,Huazhong University of Science and Technology
Wuhan 430074, China
3 State Key Laboratory of Polymer Physics and Chemistry,CAS Research/Education Center for Excellence in Molecular Sciences ,Institute of Chemistry Chinese Academy of Sciences,Beijing 100190, P. R. China
4 CAS Research/Education Center for Excellence in Molecular Sciences,Institute of Chemistry Chinese Academy of Sciences,Beijing 100190, China
  
Adv. Mater. 2018, 1800855
  
Organic solar cells (OSCs) can be unstable under ultraviolet (UV) irradiation. To address this issue and enhance the power conversion efficiency (PCE), an inorganic‐perovskite/organic four‐terminal tandem solar cell (TSC) based on a semitransparent inorganic CsPbBr3perovskite solar cell (pero‐SC) as the top cell and an OSC as bottom cell is constructed. The high‐quality CsPbBr3photoactive layer of the planar pero‐SC is prepared with a dual‐source vacuum coevaporation method, using stoichiometric precursors of CsBr and PbBr2with a low evaporation rate. The resultant opaque planar pero‐SC exhibits an ultrahigh open‐circuit voltage of 1.44 V and the highest reported PCE of 7.78% for a CsPbBr3‐based planar pero‐SC. Importantly, the devices show no degradation after 120 h UV light illumination. The related semitransparent pero‐SC can almost completely filter UV light and well maintain photovoltaic performance; it additionally shows an extremely high average visible transmittance. When it is used to construct a TSC, the top pero‐SC acting as a UV filter can utilize UV light for photoelectric conversion, avoiding the instability problem of UV light on the bottom OSC that can meet the industrial standards of UV‐light stability for solar cells, and leading to the highest reported PCE of 14.03% for the inorganic‐perovskite/organic TSC.
  
  



小黑屋|手机版|Archiver|版权声明|一起进步网 ( 京ICP备14007691号-1

GMT+8, 2024-6-16 06:05 , Processed in 0.087649 second(s), 37 queries .

Powered by Discuz! X3.2

© 2001-2013 Comsenz Inc.

快速回复 返回顶部 返回列表