湖南大学材料学院蒋福林

xinkaishi

蒋福林，男，湖南大学助理教授。1988年3月出生，江西吉安人，中共党员，湖南大学和McMaster University联合培养博士（工学），Kyushu University博士后研究员及助理教授，现担任湖南大学材料科学与工程学院金属材料与控制工程系助理教授、硕士生指导教师（张辉 教授团队），以及Journal of Materials Science & Technology、Materials & Design、Metallurgical and Materials Transactions A、Journal of Alloys and Compounds、Journal of Materials Research和Transactions of Nonferrous Metals Society of China等国内和国际知名期刊通信评审专家。目前主要研究方向包括金属材料强韧化机理、力学与组织定量物理模型、塑性变形基础理论、加工工艺及高性能轻量化合金设计等，正主持国家自然科学基金青年科学基金项目、湖南大学科研启动经费及人才项目等，曾经主持湖南省研究生科研创新项目，作为主要参与人完成了“973”项目子课题、科技部国际合作计划项目、国家自然科学基金和教育部博士点基金等国家级、省部级重要科研课题，同时主要负责完成了日本学术振兴会（JSPS）重点基础研究项目，取得了一系列研究成果。相关研究成果已在国内和国际相关领域知名学术期刊上发表，共40余篇，包括International Journal of Plasticity，Journal of Materials Science & Technology，Metallurgical and Materials Transactions A，Materials & Design，Journal of Alloys and Compounds， Materials Characterization，Materials Science and Engineering: A, Transactions of Nonferrous Metals Society of China，ISIJ International和Journal of Materials Science等学术期刊。


蒋福林，男，博士及博士后，助理教授、硕士生导师。团队成员有张辉教授、滕杰教授、傅定发教授。
邮箱：jfling2820@163.com; fulin.jiang.88@hnu.edu.cn；
地址：湖南大学 材料科学与工程学院 314 房间（湖南省长沙市岳麓区麓山南路1号 邮编：410082）


教育背景
(1) 2013–2015, McMaster University（加拿大）, 材料科学与工程, 博士联合培养, 导师: G.R. Purdy和H.S. Zurob 教授
(2) 2012–2015, 湖南大学, 材料科学与工程, 博士, 导师: 张辉 教授
(3) 2010–2012, 湖南大学, 材料科学与工程, 硕士（硕博连读）导师: 张辉 教授
(4) 2006–2010, 湖南大学, 材料成型及控制工程, 学士（推荐免试研究生）


工作履历
(1) 2019–至今, 湖南大学, 材料科学与工程学院, 助理教授 （张辉 教授团队）
(2) 2016–2018, Kyushu University（日本）, 博士后研究员、助理教授, 合作导师: S. Takaki和T. Tsuchiyama 教授


研究领域
团队研究方向：合金热力作用下的物理模拟、模型及机理；连续大塑性变形技术及相关理论；先进成形过程的有限元模拟与虚拟制造技术；金属材料强韧化机理及性能调控技术；金属基复合材料；微细结构材料制备、组织与性能表征


本人主要研究方向：
[1] 金属材料强韧化机理、模型模拟及性能调控技术；
[2] 高性能轻合金大塑性变形机制及应用研究；
[3] 显微组织原位表征及定量评价新技术、新方法研究；
[4] 高性能金属材料（铝合金、高强钢、钛合金及镁合金等）加工过程物理及有限元模拟、模型及塑性变形机理；
[5] 增材制造金属材料开发及组织性能调控；
[6] 新材料设计、开发及制备技术。


主持项目
[1] 国家自然科学基金青年科学基金项目 (51904099): 基于XRD线形宽化分析的Al-Zn-Mg-Cu合金塑性晶格各向异性研究，2020/01-2022/12，在研，主持。
[2] 湖南大学科研启动经费及人才项目 (531118010353): 基于定量位错分析的立方金属材料强韧化机理研究，2019/03-2022/12，在研，主持。
[3] 宁夏智能装备CAE重点实验室开放基金项目(KFYB2019002): 基于位错理论的铝合金连续大塑性变形本构模型及模拟研究，2019/12-2020/12，在研，主持。


学术成果
ORCID ID: https://orcid.org/0000-0002-2430-5867


自2019年起部分代表作（“*”：通讯作者）：
[12] Fulin Jiang *, Setsuo Takaki, Takuro Masumura, Ryuji Uemori, Hui Zhang, Toshihiro Tsuchiyama *, Nonadditive strengthening functions for cold-worked cubic metals: Experiments and constitutive modeling, International Journal of Plasticity 129 (2020) 102700.
[11] Guowei Bo, Fulin Jiang *, Huaguang Su, Luoyi Wu, Jie Teng, Dingfa Fu, Hui Zhang *, Static softening behavior and modeling of an Al–Cu–Mg–Zr alloy with various pre-precipitation microstructures during multistage hot deformation, Materials Science and Engineering: A 778 (2020) 139094.
[10] Fulin Jiang *, Takuro Masumura, Kentaro Hirata, Toshihiro Tsuchiyama, Setsuo Takaki, A new diffraction line profile breadth analysis approach for evaluating plastic lattice strain anisotropy in cold-worked nickel under various strain paths, International Journal of Plasticity 112 (2019) 89-107.
[9] Kunyang Chen, Jie Tang, Fulin Jiang *, Jie Teng, Dingfa Fu, Hui Zhang *, The role of various Zr additions in static softening behavior of Al-Zn-Mg-Cu alloys during interval holding of double-stage hot deformation, Journal of Alloys and Compounds 792 (2019) 1112-1121.
[8] Fulin Jiang, Takuro Masumura, Toshihiro Tsuchiyama *, Setsuo Takaki, Effect of substitutional element addition on Hall-Petch relationship in interstitial free ferritic steels, ISIJ International 59(10) (2019) 1929-1931.
[7] Jie Tang, Hui Zhang *, Jie Teng, Dingfa Fu, Fulin Jiang *, Effect of Zn content on the static softening behavior and kinetics of Al-Zn-Mg-Cu alloys during double-stage hot deformation, Journal of Alloys and Compounds 806 (2019) 1081-1096.
[6] Xinrong Chen, Zhiming Xu, Dingfa Fu, Hui Zhang, Jie Teng *, Fulin Jiang *, Comparative Hot Workability Characteristics of an Al–Si/SiCp Aluminium Matrix Composite Hybrid Reinforced with Various TiB 2 Additions, Metals and Materials International (2020): 1-12.
[5] Xiankun Ji, Hong Yu, Baoqi Guo, Fulin Jiang, Dingfa Fu, Jie Teng, Hui Zhang *, John J. Jonas, Post-dynamic α to β phase transformation and reverse transformation of Ti-5Al-3V alloy after hot deformation in two phase region, Materials & Design 188 (2020) 108466.
[4] Huan Cai, Jiamin Hu, Fulin Jiang, Dingfa Fu *, Jie Teng, Hui Zhang *, A novel repetitive continuous welding extrusion for refining grain size and evading strength-ductility trade-off in AZ31 magnesium alloy, Materials Science and Engineering: A 753 (2019) 192-196.
[3] Guowei Bo, Fulin Jiang, Zhaoyu Dong, Guan Wang, and Hui Zhang *, Revealing the influence of pre-precipitation microstructure on hot workability in an Al-Cu-Mg-Zr alloy, Materials Science and Engineering: A 755 (2019) 147-157.
[2] Longqing Tang, Fulin Jiang, Jie Teng *, Dingfa Fu, Hui Zhang *, Strain path dependent evolutions of microstructure and texture in AZ80 magnesium alloy during hot deformation, Journal of Alloys and Compounds, 806 (2019) 292-301.
[1] Xiankun Ji, Baoqi Guo, Fulin Jiang, Hong Yu, Dingfa Fu, Jie Teng, Hui Zhang *, John J. Jonas, Accelerated flow softening and dynamic transformation of Ti-6Al-4V alloy in two-phase region during hot deformation via coarsening α grain, Journal of Materials Science & Technology, 36 (2020) 160–166.


2019年之前代表性论文（“*”：通讯作者）：
[1] Fulin Jiang, Hatem S. Zurob, Gary R. Purdy, Xiang Wang, Hui Zhang, Characterization of the isothermal precipitation kinetics of an Al-Zn-Mg-Cu alloy, Metallurgical and Materials Transactions A 49(10) (2018) 5157-5168.
[2] Fulin Jiang, Hui Zhang, Xianna Meng, Luoxing Li, Effects of Ti addition on the microstructures and mechanical properties of the Al-Mn-Mg-RE alloy, Materials & Design 55 (2014) 280-285.
[3] Fulin Jiang, Hui Zhang, Non-isothermal precipitation kinetics and its effect on hot working behaviors of an Al-Zn-Mg-Cu alloy, Journal of Materials Science 53 (4) (2018) 2830-2843.
[4] Fulin Jiang, Hatem S. Zurob, Gary R. Purdy, Hui Zhang, Static softening following multistage hot deformation of 7150 aluminum alloy: experiment and modeling, Materials Science & Engineering A 648 (2015) 164-177.
[5] Fulin Jiang, Hui Zhang, Luoxing Li, Jianghua Chen, The kinetics of dynamic and static softening during multistage hot deformation of 7150 aluminum alloy, Materials Science & Engineering A 552 (2012) 269- 275.
[6] Fulin Jiang, Hui Zhang, Xiankun Ji, Xianna Meng, Luoxing Li, Comparative hot deformation characters of Al-Mn-Mg-RE alloy and Al-Mn-Mg-RE-Ti alloy, Materials Science & Engineering A 595(10) (2014) 10-17.
[7] Fulin Jiang, Hui Zhang, Jian Su, Yishan Sun, Constitutive characteristics and microstructure evolution of 7150 aluminum alloy during isothermal and non-isothermal multistage hot compression, Materials Science & Engineering A 636 (2015) 459-469.
[8] Fulin Jiang, Hatem S. Zurob, Gary R. Purdy, Hui Zhang, Characterizing precipitate evolution of an Al-Zn-Mg-Cu-based commercial alloy during artificial aging and non-isothermal heat treatments by in situ electrical resistivity monitoring, Materials Characterization 117 (2016) 47-56.
[9] Fulin Jiang *, Kentaro Hirata, Takuro Masumura, Toshihiro Tsuchiyama, Setsuo Takaki, Effect of the surface layer strained by mechanical grinding on X-ray diffraction analysis, ISIJ International 58(2) (2018) 376-378.
[10] Fulin Jiang, Jie Tang, Dinfa Fu, Jianping Huang, Hui Zhang, A Correction to the Stress-Strain Curve During Multistage Hot Deformation of 7150 Aluminum Alloy Using Instantaneous Friction Factors, Journal of Materials Engineering and Performance 27 (2018) 3083-3090.
[11] Fulin Jiang, Hui Zhang, Shuchu Weng, Dingfa Fu, Characterization of dynamic microstructural evolution of 7150 aluminum alloy at high strain rate during hot deformation, Trans. Nonferrous Met. Soc. China 26 (1) (2016) 51-62.
[12] Setsuo Takaki, Fulin Jiang *, Takuro Masumura, Toshihiro Tsuchiyama, Correction of elastic anisotropy in Williamson-Hall plots by diffraction Young’s modulus and direct fitting method, ISIJ International 58(4) (2018) 769-775.
[13] Setsuo Takaki, Takuro Masumura, Fulin Jiang *, Toshihiro Tsuchiyama, Effect of instrumental correction on X-ray line profile analysis in cold rolled ferritic steel, ISIJ International 58(6) (2018) 1181-1183.
[14] Hui Zhang, Fulin Jiang, Xiaoyang Shang, Luoxing Li, Flow stress and microstructural evolution of the horizontal continuous casting Al-0.96Mn-0.38Si-0.18Fe alloy during hot compression, Materials Science & Engineering A 571 (2013) 25-32.
[15] Yishan Sun, Fulin Jiang, Hui Zhang, Jian Su, Wuhua Yuan, Residual stress relief in Al-Zn-Mg-Cu alloy by a new multistage interrupted artificial aging treatment, Materials & Design 92 (2016) 281-287.
[16] Setsuo Takaki, Daichi Akama, Fulin Jiang, Toshihiro Tsuchiyama, Correction of the Williamson-Hall Plots by the Diffraction Young’s Modulus, Journal of the Society of Materials Science, Japan 67 (3) (2018) 383-388.
[17] Setsuo Takaki, Takuro Masumura, Fulin Jiang, Toshihiro Tsuchiyama, Relation between elastic constants and elastic anisotropy in metals, Journal of the Society of Materials Science, Japan 67(9) (2018) 855-860.
[18] Xiankun Ji, Hui Zhang, Song Luo, Fulin Jiang, Dingfa Fu, Microstructures and properties of Al-Mg-Si alloy overhead conductor by horizontal continuous casting and continuous extrusion forming process, Materials Science & Engineering A 649 (2016) 128-134.
[19] Can Liu, Hui Zhang, Fulin Jiang, Characterization of dynamic microstructure evolution during hot deformation of the Al-4.10Cu-1.42Mg-0.57Mn-0.12Zr alloy, Trans. Nonferrous Met. Soc. China 24 (2014) 3477-3485.
[20] Jiamin Hu, Jie Teng, Xiankun Ji, Xiangxin Kong, Fulin Jiang, Hui Zhang, Microstructural Characteristic of the Al-Fe-Cu Alloy During High-Speed Repetitive Continuous Extrusion Forming, Journal of Materials Engineering and Performance 25(11) (2016) 4769-4775.
[21] Setsuo Takaki, Takuro Masumura, Fulin Jiang, Toshihiro Tsuchiyama, Evaluation of Dislocation Density in Cold Worked Low Carbon Ferritic Steel, Tetsu-to-Hagané(Journal of the Iron and Steel Institute of Japan), 104 (11), (2018) 683-688.
[22] Takuro Masumura, Setsuo Takaki, Fulin Jiang, Toshihiro Tsuchiyama, Discussion about procedure for determining parameter α in Modified Williamson-Hall method, Tetsu-to-Hagané(Journal of the Iron and Steel Institute of Japan), 104(11), (2018) 717-719.


国内及国际际会议:
[1] Fulin Jiang, Hatem S. Zurob, Gary R. Purdy, Hui Zhang, edited by: Matthias Militzer, Gianluigi Botton, Long-Qing Chen, James Howe, Chadwick Sinclair, and Hatem Zurob. In situ characterization of precipitate formation and dissolution in an Al-Zn-Mg-Cu alloy by electrical resistivity measurement, International Conference on Solid-Solid Phase Transformations in Inorganic Materials (PTM-2015), 06 (2015) 727-734. (Whistler, Canada)
[2] T. Tsuchiyama, Y. Ono, Fulin Jiang, S. Takaki, Effect of Chemical Composition on the Ductile-to-Brittle Transition on Fe-Mn-C Ternary Alloy, ICAS 2016 & HMnS (2016) 57-59. (Chengdu, China)
[3] Fulin Jiang, D. Akama, T. Tsuchiyama, S. Takaki, Role of silicon addition in grain refinement strengthening of ferritic steel, CAMP-ISIJ 30 (2017) 368. (Tokyo, Japan)
[4] Fulin Jiang, K. Hirata, T. Tsuchiyama, S. Takaki, Correlation between grain boundary segregation and Hall-Petch coefficient in Fe-Si steels, CAMP-ISIJ 30 (2017) 867. (Sapporo, Japan)
[5] K. Hirata, Fulin Jiang, T. Tsuchiyama, S. Takaki, Effect of annealing time on yield strength of Fe-3mass% Si ferritic steel, CAMP-ISIJ 30 (2017), 866. (Sapporo, Japan)
[6] Fulin Jiang, Setsuo Takaki, Daichi Akama, Toshihiro Tsuchiyama, Direct correction of the elastic anisotropy in Williamson-Hall plots for cold worked metals, EUROMAT-2017 (2017). (Thessaloniki, Greece).
[7] Setsuo Takaki, Fulin Jiang, Daichi Akama, Toshihiro Tsuchiyama, Application of direct fitting method to the modified Williamson-Hall method, EUROMAT-2017 (2017). (Thessaloniki, Greece)
[8] Takuro Masumura, Fulin Jiang, Setsuo Takaki, Daichi Akama, Toshihiro Tsuchiyama, Evaluation of dislocation density in cold worked austenitic steel SUS316L, EUROMAT-2017 (2017). (Thessaloniki, Greece).
[9] 蒋福林，滕杰，傅定发，张辉，基于原位电阻率表征Al-Zn-Mg-Cu 合金析出动力学，中国材料大会（四川成都）2019.7.
[10] 季显坤，虞洪，蒋福林，傅定发，滕杰，张辉, 初始α 晶粒尺寸对Ti-6Al-4V 合金在两相区热变形行为及动态相变的影响, 中国材料大会（四川成都）2019.7.
[11] 汤杰，陈坤阳，蒋福林，滕杰，傅定发，张辉， Zr 含量对Al-Zn-Mg-Cu 合金双道次热变形静态软化机制的影响，中国材料大会（四川成都）2019.7.


申请专利：
[1] 张辉，孙轶山，蒋福林，袁武华. 一种保持铝合金强度降低淬火残余应力的时效热处理方法. ZL 2015 1 0295203.2.
[2] 张辉，苏剑，蒋福林，孙轶山. 一种降低Al-Mg-Si合金板材各向异性的工艺方法. ZL 2015 1 0336976.0.


奖励与荣誉
2007年10月： 国家励志奖学金；
2008年10月： 国家励志奖学金，湖南大学三好学生；
2009年10月： 国家励志奖学金；
2011年9月：  湖南大学优秀研究生干部；
2013年6月：  湖南大学博士研究生校长奖学金；
2013年10月： 湖南大学优秀研究生，湖南大学熊晓鸽奖学金；
2014年8月：  湖南大学优秀博士研究生学校奖学金；
2014年10月： 博士研究生国家奖学金；
2017年11月： 湖南大学优秀博士论文；
2019年11月：  湖南大学新聘教师入职培训微格演练二等奖。