|
|
杨振国,复旦大学教授主要从事材料失效分析及预防等研究，现任中国机械工程学会理事、中国机械工程学会失效分析分会副理事长。他的研究团队在核电、火电、风电、石化、化工、钢铁、交通、电子电路及市政管网等9个行业已承担完成重大工程失效分析项目100多项，包括德国BAYER、EVONIK、HELLA、FAG，日本HITACHI、TOSHIBA、MITSUBISHI、NSK，英国BP，瑞典SKF，瑞士ABB，加拿大AECL，美国YUBA、INVISTA，西班牙CEPSA等十多家国际知名公司，以及我国宝钢集团（现宝武集团）、中国石化、国家核电（现国家电投）、秦山核电站、田湾核电站、上海电气集团、中车集团等知名央企所属单位委托的项目。以课题组为单位，杨振国教授团队在国际SCI/EI期刊上发表的“失效分析（failure analysis）”主题词相关的论文数位列世界前2名。此外，杨振国教授连续7届应邀在每2年举行一次的“全国失效分析学术会议”作大会报告，连续4届担任每年举行一次的“全国失效分析大奖赛”执行主席，由他主讲的本科生专业选修课《材料失效分析》2016年获评为上海市精品课程。《科技日报》(2014年11月2日头版)、《解放日报》(2013年11月4日要闻版)、《文汇报》(2012年10月30日科教文版)等一些重要报刊，分别以专题形式报道了杨振国教授及其团队在材料失效分析和新材料开发方面所取得的突出成绩。
杨振国教授
职称：教授/ 博导
办公室：先进材料楼 407室
联系电话：65642523
Email：zgyang@fudan.edu.cn
上海市精品课程《材料失效分析》、《材料科学导论》负责人
主要简历
1978.02－1988.03 华东理工大学 本科生、硕士生、博士生
1994.04－1995.05 德国国立德累斯顿聚合物研究所 博士后
（Institute of Polymer Research Dresden e.V.，Germany）
1996.02－1997.06 德国慕尼黑技术大学 客座教授
（Technical University of Munich，Germany）
2009.02－2009.07 德国纽伦堡科技大学 访问教授
（University of Applied Sciences Nuremberg, Germany)
1997.09－至 今 复旦大学材料科学系 副教授、教授、博士生导师
复合材料研究室、复旦-北泰城市管网安全联合研究中心主任
学术任职
中国科协全国金相与显微分析学科科学传播专家团队 首席专家
上海市安全生产 核心专家
中国机械工程学会失效分析分会 失效分析专家
中国机械工程学会 理事
中国机械工程学会失效分析分会 副理事长
中国印制电路协会全印制电子分会 副会长
中国体视学学会金相与显微分析分会 常务理事
中国表面工程协会电镀分会 常务理事
中国硅酸盐学会玻璃钢分会 理事
中国石油和石化工程研究会 理事
《电子电镀》杂志 副主编
《玻璃钢/复合材料》杂志 编委
《理化检验/物理分册》杂志 编委
《印制电路信息》杂志 编委
研究方向与任教课程
1. 研究方向
复合材料 （聚合物基、陶瓷基、金属基）
失效分析 （金属材料、非金属材料）
印制电子 （纳米导电墨水、有机电子材料）
2. 主讲课程
《材料失效分析》 (本科生课程, 上海市精品课程, 上海市重点课程)
《材料科学导论》 (本科生课程, 上海市精品课程, 上海市重点课程)
《材料化学 - II》 (研究生课程, 复旦大学研究生教学成果二等奖)
2010年以来获得的省部级奖、期刊论文和发明专利
一、省部级奖
1. 杨振国等10人. 重大发电设备失效分析的关键技术与治理.
上海市科技进步二等奖, 上海，2014.4
2. 杨振国等2人. 高耐磨耐蚀三元复合管道系列产品的开发及其工程应用.
中国技术市场协会金桥奖, 北京，2013.6
3. 杨振国等11人. 重水堆核电机组热交换器的腐蚀失效分析及其预防对策.
中国工业防腐蚀技术协会技术进步一等奖, 北京，2012.7
4. 杨振国等10人. 核电装置RCW换热器的失效分析关键技术与工程应用.
中国石油和化学工业联合会科技进步二等奖, 北京，2012.10
5. 杨振国. 上海市育才奖，
上海市教育委员会，上海，2012.9
6. 杨振国等7人. 耐磨耐蚀三元复合管道的制备技术及工程应用.
上海市科技进步三等奖, 上海，2011.4
7. 杨振国等6人. 石化行业用高耐磨耐蚀三元复合管道的制备技术及工程应用.
中国石油和化学工业联合会技术发明二等奖, 北京，2010.10
二、期刊论文（通讯作者*）
1. Qun Ding, Xiao-Feng Tang，Zhen-Guo Yang*. Failure analysis on abnormal corrosion of economizer tubes in a waste heat boiler. Engineering Failure Analysis, 2017, 73: 129-138.
2. Xiao-Feng Tang，Yu-Xiao Tao, Zhen-Guo Yang*. Efficient strategy of chlorine-assisted liquid phase exfoliation of graphite. Journal of Materials Science, 2017, 57: 3786-3793.
3. Shi-Ming Guo, Zhen-Guo Yang*, Xiao-Ying Tang, Yan-Tian Zhu, Safety assessment of high density polyethylene pipe with thermal damages Plastics. Rubber and Composites: Macromolecular Engineering, 2017, DOI: 10.1080/14658011.2017-1301339
4. Yi Gong, Shi-Meng Hu, Jing-Lu Fei, Xiao-Lei Yang, Zhen-Guo Yang*, Ai-Hua Guo, Xiu-Qiang Shi, Yong-Cheng Xie. Comparative study on degradation of ethylene-propylene rubber for nuclear cables from gamma and beta irradiation. Polymer Testing, 2017, DOI: 10.1016/j.polymertesting.2017.03.017
5. Yan-Long Tai, Gilles Lubineau*, Zhen-Guo Yang*. Rapid response polyvinylidene-fluoride-based flexible Films. Advanced Materials, 2016, 28: 4665–4670.
6. Dong-Yu Wang, Yu Chang, Ying-Xia Wang, Qun Zhang, Zhen-Guo Yang*. A green aqueous silver nanoplate conductive ink for flexible printed circuit. Materials Technology: Advanced Performance Materials, 2016, 31(1): 32-37.
7. Yu Chang, Zhen-Guo Yang*. Additive fabrication of conductive patterns by a template transfer process based on benzotriazole adsoption as a seperaton layer. ACS Applied Materials and Interfaces, 2016, 8(22): 14211-14219.
8. Bo-Chao Liu, Zhen-Guo Yang. Failure analysis of shock absorption spring in motorcycle. Journal of Failure Analysis and Prevention, 2016, 16: 337-345.
9. Xiao-Feng Tang, Zhen-Guo Yang*, Jia-Hui Liang. Synthesis of ternary FeNi2S4/CNT/graphene nanocomposite with improved electrochemical properties. RSC Advances, 2016, 6, 88168 - 88173.
10. Yu Chang, Yu Tao, Qun Zhang, Zhen-Guo Yang*. Selective adsorption of catalyst and copper plating for additive fabrication of conductive patterns and through-holes. Electrochimica Acta, 2015, 158: 7-12.
11. Yu Tao，Yu Chang，Yu-Xiao Tao，Hai-Ping Wu，Zhen-Guo Yang*. Self-healing Ag/epoxy electrically conductive adhesive using encapsulated epoxy-amine healing chemistry. Journal of Applied Polymer Sciences, 2015, 132: 1-6.
12. Yue-Yue Ma, Shi Yan, Zhen-Guo Yang*，Guo-Shui Qi, Xin-You He．Failure analysis on circulating water pump of duplex stainless steel in 1000 MW ultra-supercritical thermal power. Engineering Failure Analysis, 2015, 47: 162-177.
13. Dong-Yu Wang, Yu Chang, Qian-Shu Lu, Zhen-Guo Yang*. Nano-Organic Silver Composite Conductive Ink for Flexible Printed Circuit. Materials Technology: Advanced Performance Materials, 2015, 30(1): 54-59.
14. Chao Yang, Yu Chang, Zhen-Guo Yang*. Preparation and characterization of printable solder resist inks based on hyperbranced polyster. Journal of Applied Polymer Scicences, 2015, 132(15): 1-11.
15. Shi-Meng Hu, Sheng-Hui Wang, Zhen-Guo Yang*．Failure analysis on unexpected wall-thinning of heat exchange tubes in ammonia evaporators. Case Studies in Engineering Failure Analysis, 2015, 3: 52-61.
16. Yan-Long Tai, Zhen-Guo Yang*. Flexible pressure sensing film based on ultra-sensitive SWCNT/PDMS spheres for monitoring human pulse signals. Journal of Materials Chemistry B, 2015, 3: 5436-5441.
17. Yang-Long Tai, Zhen-Guo Yang*. Facile and scable preparation of solid silver nanoparticles (<10nm) for flexible electronics. ACS Applied Materials and Interfaces, 2015, 7(31): 17104-17111.
18. Yan-Long Tai, Zhen-Guo Yang*. Flexible, transparent, thickness-controllable SWCNT/PEDOT: PSS hybrid film based on coffee-ring lithography for functional noncontat sensing device. Langmiur, 2015, 31: 13257-13264
19. Fei-Jun Chen, Chen Yao, Zhen-Guo Yang*. Failure analysis on abnormal wall thinning of heat-transfer titanium tubes of condensers in nuclear power plant Part I: corrosion and wear. Engineering Failure Analysis, 2014, 37: 29-41.
20. Fei-Jun Chen, Chen Yao, Zhen-Guo Yang*. Failure analysis on abnormal wall thinning of heat-transfer titanium tubes of condensers in nuclear power plant Part II: erosion and cavitation corrosion. Engineering Failure Analysis, 2014, 37: 42-52.
21. Chao Yang, Zhe-Hui Zhuang, Zhen-Guo Yang*. Pulverized polyurethane foam particles reinforced rigid polyurethane foam and phenolic foam. Journal of Applied Polymer Science, 2014, 131(1): 1-7.
22. Yu Chang, Chao Yang, Xin-Yao Zheng, Dong-Yu Wang, Zhen-Guo Yang*. Fabrication of copper patterns on flexible substrate by Patterning-Adsorption-Plating process. ACS Applied Materials and Interfaces, 2014, 6: 768−772.
23. Fei-Jun Chen, Shi Yan, Zhen-Guo Yang*. Failure Analysis on Electrolytic Ni/Au Surface Finish of PCB Used for Wire Bonding and Soldering. Soldering and Surface Mount Technology, 2014, 26(4): 180−193.
24. Yu. Tao, Yu Chang，Yu-Xia Tao，Zhen-Guo Yang*, Hai-Wu Ping*，Self-healing isotropical conductive adhesives filled with Ag nanowires. Materials Chemistry and Physics, 2014, 148(3): 778-782.
25. Yi Gong, Zhen-Guo Yang*, Xin-Hao Meng. Failure analysis of one peculiar ‘Yin-Yang’ corrosion morphology on heat exchanger tubes in purified terephthalic acid (PTA) dryer. Engineering Failure Analysis, 2013, 31: 203-210.
26. Yu Tao, Yu-Xiao Tao, Liu-Yang Wang, Biao-Bing Wang, Zhen-Guo Yang, Yan-Long Tai. High-reproducibility, flexible conductive patterns fabricated with silver nanowire by drop or fit-to-flow method. Nanoscale Research Letters, 2013，8: 147-152.
27. Yi Gong, Zhen-Guo Yang*. Fracture failure analysis of automotive accelerator pedal arms with polymer matrix composite material. Composites B, 2013，53: 103-111.
28. Shi Yan, Fei-Jun Chen, Yue-Yue Ma, Zhen-Guo Yang*. Failure analysis of un-wetting for the surface finish on the ENIG. Journal of Failure Analysis and Prevention, 2013, 13(2): 194-201.
29. Chao Yang, Zhen-Guo Yang*. Synthesis of low viscosity, fast UV curing solder resist based on epoxy resin for ink-jet printing. Journal of Applied Polymer Science, 2013, 129(1): 187-192
30. Wei-Ming Guo, Zhen-Guo Yang*，Guo-Jun Zhang*. Effect of high temperature heat treatment on ZrB2-SiC composites added with Yb2O3. Ceramic International，2013, 39(6): 7229-7233
31. Zhen-Guo Yang*, Yi Gong, Jian-Zhong Yuan. Failure analysis of leakage on titanium tubes within heat exchanger in a nuclear power plant. part I: electrochemical corrosion. Materials and Corrosion, 2012, 63(1): 7-17
32. Yi Gong, Zhen-Guo Yang*, Jian-Zhong Yuan. Failure analysis of leakage on titanium tubes within heat exchanger in a nuclear power plant. part II: mechanical degradation. Materials and Corrosion, 2012, 63(1): 18–28.
33. Yu Tao, Zhen-Guo Yang*, Xiao-Lu Lu, Guo-Liang Tao, Yan-Ping Xia, Hai-Ping Wu*. Influence of filler morphology on percolation threshold of isotropical conductive adhesives
Science China Technological Sciences, 2012, 55(1): 28-33.
34. Xiao-Wei Tian, Zhen-Guo Yang*. Ortho-substituted ortho-cresol novelac as an epoxy resin curing agent. International Journal of Polymeric Materials, 2012. 61(2): 136-143.
35. Wei-Ming Guo, Zhen-Guo Yang*, Jef Vleugels, Guo-Jun Zhang*. Effect of pressure loading cycle on spark plasma sintered ZrB2-SiC-Yb2O3 ceramics. Ceramics International, 2012, 38 (6): 5293-5297.
36. Wei-Ming Guo, Zhen-Guo Yang*， Guo-Jun Zhang. Synthesis of submicrometer HfB2 powder and its densification. Materials Letters, 2012, 83: 52-55.
37. Wei-Ming Guo, Guo-Jun Zhang*, Zhen-Guo Yang. .Pressureless sintering of zirconium diboride ceramics with boron additive. Journal of the American Ceramic Society, 2012, 95(8): 2470–2473.
38. Yi Gong, Yu-Fei Wang, Zhen-Guo Yang*. Impact simulation on ductile metal pipe with polymer coating by a coupled finite element and meshfree method. Journal of Failure Analysis and Prevention, 2012, 12(3): 267-272.
39. Yi Gong, Zhen-Guo Yang*, Fa-Yun Yang,. Heat strength evaluation and microstructures observation of the welded joints of one china-made T91 steel. Journal of Materials Engineering and Performance, 2012，21(7): 1313-1319.
40. Yan-Long Tai, Zhen-Guo Yang*. Preparation of stable aqueous conductive ink with silver nano-flakes and their application for paper-based flexible electronics. Surface and Interface Analysis, 2012, 44(5): 529-534.
41. Zhi-Qiang Yu, Zhen-Guo Yang. Failure analysis of fatigue fracture on the outer ring of a cylindrical roller bearing in an air blower motor. Journal of Failure Analysis and Prevention, 2012, 12(4) : 427–437.
42. Yu Chang, Dong-Yu Wang, Yan-Long Tai, Zhen-Guo Yang*. Preparation, characterization and reaction mechanism of a novel silver-organic conductive ink. Journal of Materials Chemistry, 2012, 22 (48): 25296 – 25301.
43. Yan-Long Tai, Zhen-Guo Yang*. Fabrication of paper-based conductive patterns for flexible electronics by direct-writing.Journal of Materials Chemistry, 2011, 21 (16):5938 – 5943.
44. Yan-Long Tai, Zhen-Guo Yang*, Zhi-Dong Li. A promising approach to conductive patterns with high efficiency for flexible electronics. Applied Surface Science, 2011, 257: 7096-7100.
45. Yan-Long Tai, Jia-Sheng Qian, Ji-Bin Miao, Ru Xia, Yu-Chuan Zhang, Zhen-Guo Yang*. Preparation and characterization Si3N4/SBR nanocomposites with high performance. Materials and Design, 2011, 34: 522-527.
46. Yan-Long Tai, Ying-Xia Wang, Zhen-Guo Yang*, Zhi-Qiang Chai. Green approach to prepare silver nanoink with potentially high conductivity for printed electronics. Surface and Interface Analysis, 2011, 43(12): 1480-1485.
47. Yi Gong, Zhen-Guo Yang*. Corrosion evaluation of one dry desulfurization equipment ¾ circulating fluidized bed boiler. Materials and Design, 2011, 32(2): 671-681.
48. Yi Gong, Jian Cao, Li-Na Ji, Chao Yang, Cheng Yao, Zhen-Guo Yang*, Jun Wang, Zheng-Fei Hu, Xiao-Ming Luo, Fu-Ming Gu, An-Fang Qi, Shang-Yun Ye. Assessment of disimilar steels welded joint between T92 and HR3C. Fatigue and Fracture of Engineering Materials and Structures, 2011, 34(2): 83-96.
49. Yi Gong, Chao Yang，Cheng Yao，Zhen-Guo Yang*. Acidic/caustic alternating corrosion on carbon steel pipes in heat exchanger of ethylene plant. Materials and Corrosion, 2011, 62(10): 967-978.
50. Jian Cao, Yi Gong, Zhen-Guo Yang*, Xiao-Ming Luo, Fu-Ming Gu, Zheng-Fei Hu. Creep fracture behavior of dissimilar weld joint between T92 martensitic and HR3C austenitic steels. International Journal of Pressure Vessel and Piping, 2011, 88: 94-98.
51. Jian Cao, Yi Gong, Kai Zhu, Zhen-Guo Yang*, Xiao-Ming Luo, Fu-Ming Gu. Microstructure and mechanical properties of dissimilar materials joints between T92 martensitic and S304H austenitic steels. Materials and Design, 2011, 32(5):2763-2770.
52. Jian Cao, Yi Gong, Zhen-Guo Yang*. Microstructural analysis on creep properties of dissimilar materials joints between T92 martensitic and HR3C austenitic steels. Materials Science and Engineering A, 2011, 528: 6103-6111.
53. Kai Zhu, Zhen-Guo Yang*. The Effect of magnesium on the austenite grain growth of the heat affected zone in low carbon steels. Metallurgical and Materials Transaction A, 2011, 42(8)：2207-2213.
54. Kai Zhu, Zhen-Guo Yang*. Effect of Mg Addition on the ferrite grain boundaries microorientation in HAZ of low carbon steels. Journal of Materials Science & Technology, 2011, 27(3): 252-256.
55. Kai Zhu, Jian Yang, Rui-zhi Wang, Zhen-Guo Yang*. Effect of Mg addition on inhibiting austenite grain growth of Ti-bearing low carbon steels. Journal of Iron and Steel Research International, 2011, 18(9): 60-64.
56. Wei-Ming Guo, Zhen-Guo Yang*, Guo-Jun Zhang. Effect of carbon impurities on hot-pressed ZrB2-SiC ceramics. Journal of American Ceramic Society, 2011，94(10): 3241–3244.
57. Wei-Ming Guo, Zhen-Guo Yang*, Guo-Jun Zhang. High-temperature deformation of ZrB2 ceramics with WC additive in four-point bending. International Journal of Refractory Metals and Hard Materials, 2011, 29:705-709.
58. Wei-Ming Guo, Zhen-Guo Yang*, Guo-Jun Zhang. Comparison of ZrB2-SiC ceramics with Yb2O3 additive prepared by hot pressing and spark plasma sintering. International Journal of Refractory Metals and Hard Materials, 2011, 29(4): 452-455.
59. Wei-Ming Guo, Zhen-Guo Yang*, Guo-Jun Zhang. Microstructural evolution of ZrB2-MoSi2 composites during heat treatment. Ceramics International, 2011, 37: 2931-2935.
60. Zhi-Qiang Yu, Shu-Li You, Zhen-Guo Yang, Horst Baier. Effect of surface functional modification of nano-alumina particles on thermal and mechanical properties of epoxy nanocomposites. Advanced Composite Materials, 2011, 20(5): 487-502
61. Zhi-Qiang Yu, Zhen-Guo Yang. Fatigue failure analysis of a grease-lubricated roller bearing from an electric motor. Journal of Failure Analysis and Prevention, 2011, 11(2) : 158–166.
62. Lan-Hui Sun, Zoubeida Ounaies, Xin-Lin Gao, Casey Whalen, Zhen-Guo Yang. Preparation, characterization and modelling of carbon nanofiber /epoxy nanocomposites. Journal of Nanomaterials, 2011, Volume 2011, Article ID 307589.
63. Xiao-Wei Tian, Zhen-Guo Yang*. Effect of CTBN concentration on thermal and morphological properties of binary copolymers of o-cresol novolac epoxy resin and bismaleimide. Polymer-Plastics Technology and Engineering, 2011, 50: 474-480.
64. Ying-Xia Wang, Xiao-Feng Tang, Zhen-Guo Yang*. A novel wet-chemical method of preparing highly monodispersed Cu2O nanoparticles. Colloids and Surfaces A, 2011, 388(1-3): 38-40.
65. Xiao-Feng Tang, Zhen-Guo Yang*, Wei-Jiang Wang. A simple way of preparing high-concentration and high-purity nano-copper colloid for conductive ink in inkjet printing technology. Colloids and Surfaces A, 2010, 360(1-3): 99-104.
66. Qian-Shu Lu, Lan-Hui Sun, Zhen-Guo Yang*, Xiao-Hui Li, Shi-Lan Jin. Optimization on the thermal and tensile influencing factors of polyurethane-based polyester fabric composites. Composites A, 2010, 41(8): 997-1005.
67. Yi Gong, Jing Zhong, Zhen-Guo Yang*. Failure analysis of bursting on the inner pipe of a jacketed pipe in a tubular heat exchanger. Materials and Design, 2010, 31(9): 4258-4268.
68. Li-Na Ji, Yi Gong, Zhen-Guo Yang*. Failure Investigation on Copper-plated Blind Vias in PCB. Microelectronics Reliability，2010, 50 (8): 1163-1170.
69. Yun-Song Gu, Yi Gong, Zhen-Guo Yang*. Hydrogen embrittlement on high-speed stainless steel belts used for tin plating chip lead frame. Journal of Failure Analysis and Prevention, 2010, 10(5): 399-407.
70. Zhe-Hui Zhuang, Bin He, Zhen-Guo Yang*. Preparation and characterization of phenolic form/HTAB-ATP nanocomposites. Plastics, Rubber and Composites, 2010，39(10)：460-464.
71. Yu-Fei Wang, Zhen-Guo Yang*. A coupled finite element and meshfree analysis of erosive wear. Tribology International, 2009，42(2) : 373-377.
72. Yi Gong , Jiang Cao, Xin-Hao Meng, Zhen-Guo Yang*. Pitting corrosion on 316L pipes in terephthalic Acid (TA) dryer. Materials and Corrosion, 2009, 60 (11)：899-908.
73. Qian-Shu Lu, Zhen-Guo Yang*, Xiao-Hui Li, Shi-Lei Jin. Synthesis, morphology and melting behavior of poly (ether ether ketone) of different molecular weights. Journal of Applied Polymer Science. 2009, 114(4): 2060-2070.
74. Lan-Hui Sun, Zhen-Guo Yang*, Xiao-Hui Li. Effects of the treatment of attapulgite and filler contents on tensile properties of PTFE and attapulgite reinforced fabric composites. Composites A, 2009，40 (11): 1785-1791.
75. Zhe-Hui Zhuang, Zhen-Guo Yang*. Preparation and characterization of colloidal carbon sphere/rigid polyurethane foam composite. Journal of Applied Polymer Science, 2009, 114(6)：3863-3869.
76. Lan-Hui Sun, Zhen-Guo Yang*, Xiao-Hui Li. Mechanical and tribological properties of POM modified with nanoparticles and solid lubricants. Polymer Engineering and Science, 2008，48(9): 1824-1832.
77. Lan-Hui Sun, Zhen-Guo Yang*, Xiao-Hui Li. Synthesis and crystallization behavior of copolymer/silica nanocomposite by in-situ cationic ring-opening copolymerization of trioxane and 1,3-dioxolane.Journal of Applied Polymer Science，2008，107(3)：1842-1849.
78. Lan-Hui Sun, Zhen-Guo Yang*, Xiao-Hui Li. Study on the friction and wear behavior of POM/ Al2O3 nanocomposites. Wear，2008，264(7)：693-700.
79. Zheng-Fei Hu, Zhen-Guo Yang, Guo-Qiu He, Cheng-Shu Chen. Damage and residual life assessment of bends for X20CrMoV12.1 main steam pipe after long term service. Journal of Failure Analysis and Prevention, 2008, 8(1): 12-20.
80. Li-Na Ji, Zhen-Guo Yang*, Jian-Sheng Liu. Failure analysis on blind vias of PCB for novel mobile phones. Journal of Failure Analysis and Prevention, 2008, 8( 6) : 524-532.
81. Yu-Fei Wang, Zhen-Guo Yang*. Finite element model of erosive wear on ductile and brittle materials. Wear，2008，265 (5): 871-878.
82. Lan-Hui Sun, Zhen-Guo Yang*, Xiao-Hui Li. Tensile and tribological properties of PTFE and nanoparticles modified epoxy based polyester fabric composites. Materials Science and Engineering A, 2008, 497(1): 487-494.
三、 发明专利
1. 杨振国 梅彤 于志强, 一种大口径耐磨耐蚀三元复合管配件的制作方法,
发明专利号：ZL201310354772.0, 授权公告日：2017-02-15
2. 杨振国 常煜, 一种纳米银线粉体的过滤制备筛选工艺,
发明专利号：ZL201410131453.8, 授权公告日: 2016-11-23
3. 杨超 杨振国, 一种用于气敏传感器电极材料的导电印刷油墨制备方法,
发明专利号：ZL201410442570.6, 授权公告日: 2016-08-24
4. 杨振国 龚嶷 祝凯, 一种重大发电设备的失效综合分析方法,
发明专利号：ZL201410003155.5, 授权公告日: 2016-08-17
5. 杨振国 常煜, 一种加成制备高粘附力高导电性线路的方法,
发明专利号：ZL201310253400.9, 授权公告日: 2016-08-10
6. 杨振国 常煜, 一种双面板的加成制备方法,
发明专利号：ZL201310460080.4, 授权公告日: 2016-06-08
7. 杨振国 常煜, 一种多层板的加成制备方法,
发明专利号：ZL201310675497.2, 授权公告日: 2016-05-25
8. 常煜 杨振国, 一种采用加成工艺制备导电线路的方法,
发明专利号：ZL201210375899.6, 授权公告日: 2016-04-13
9. 常煜 杨振国, 一种直接在树脂基板上制备导电线路的方法,
发明专利号：ZL201310131810.6, 授权公告日: 2016-01-20
10. 常煜 杨振国, 一种纳米金属单质的分离方法,
发明专利号：ZL201410018714.5, 授权公告日: 2016-01-20
11. 常煜 杨振国, 一种纳米金属单质的分离与再分散的方法,
发明专利号：ZL201410018749.9, 授权公告日: 2015-10-28
12. 杨振国 杨超, 一种基于压电式家用喷墨打印技术制备印制电子阻焊材料的方法,
发明专利号：ZL201310543150.2, 授权公告日: 2015-06-17
13. 杨超 杨振国 严石, 一种电阻屏加硬液的制备方法,
发明专利号：ZL201210291762.2, 授权公告日: 2015-03-04
14. 杨超 杨振国 严石, 一种加硬电阻屏的修复方法,
发明专利号：ZL201210291767.5, 授权公告日: 2014-07-09
15. 杨振国 杨超 柴志强, 一种低粘度UV固化阻焊油墨的制备方法,
发明专利号：ZL201210282948.1, 授权公告日: 2014-06-11
16. 唐晓峰 赵宏鑫 杨振国, 一种新型纳米氧化亚铜导电油墨及其制备方法,
发明专利号：ZL 201010115068.6, 授权公告日: 2014-04-30
17. 杨振国 袁建中 祝凯 杨敏 龚嶷, 一种预防核电装置换热器腐蚀失效的管板口密封方法,
发明专利号：ZL201110241519.5, 授权公告日: 2013-02-27
18. 杨振国 唐晓峰, 一种纳米铜的制备方法,
发明专利号：ZL200910054883.3, 授权公告日: 2012-10-17
|
声明：本网部分文章和图片来源于网络，发布的文章仅用于材料专业知识和市场资讯的交流与分享，不用于任何商业目的。任何个人或组织若对文章版权或其内容的真实性、准确性存有疑义，请第一时间联系我们，我们将及时进行处理。
|
发表于 2017-3-22 20:47:17
QQ好友和群
QQ空间
腾讯微博
腾讯朋友
收藏
转播
分享
淘帖
发表于 2019-9-9 08:31:31
