|
|
倪丁瑞，博士研究生，中国科学院金属研究所，非平衡金属材料研究部，研究员。1999年毕业于沈阳工业大学，2007年获得哈尔滨工业大学博士学位。研究领域：搅拌摩擦焊接与加工，金属基复合材料。
倪丁瑞
性 别 男
最高学历 博士研究生
职 称 研究员
专家类别 博士生导师
部 门 师昌绪先进材料创新中心 材料制备与加工研究部
通讯地址 辽宁省沈阳市沈河区文化路72号，中国科学院金属研究所，材料制备与加工研究部
邮政编码 110016 电子邮件 drni@imr.ac.cn
电 话 +86-24-83978630
传 真 +86-24-23971749
简历：
受教育经历
2004/03 – 2007/07，哈尔滨工业大学，材料科学与工程学院，材料学，博士
2001/09 – 2004/03，沈阳工业大学，材料科学与工程学院，材料学，硕士
1995/09 – 1999/07，沈阳工业大学，材料科学与工程学院材，材料加工工程，学士
研究工作经历
2017/09 – 至今， 中国科学院金属研究所，非平衡金属材料研究部，研究员
2011/09 –2017/08， 中国科学院金属研究所，非平衡金属材料研究部，副研究员
2007/07 – 2011/08，中国科学院金属研究所，非平衡金属材料研究部，助理研究员
2010/06 – 2010/09，加拿大瑞尔森大学（Ryerson University），机械工业系，博士后
1999/08 – 2001/09，开封空分集团公司，助理工程师
研究领域：
搅拌摩擦焊接与加工，金属基复合材料
代表论著：
2017:
1. Y. Tao, D.R. Ni*, B.L. Xiao, Z.Y. Ma*, W. Wu, R.X. Zhang, Y.S. Zeng, Origin of unusual fracture in nugget zone for friction stir welded 2198-T8 Al-Li alloy joints, Mater. Sci. Eng. A, 693 (2017) 1-13.
2. Q. Shang, D.R. Ni*, P. Xue, B.L. Xiao, Z.Y. Ma*, Evolution of local texture and its effect on mechanical behavior property of friction stir welded joint of as-extruded Mg-3Al-1Zn alloy, Mater. Charact., 128 (2017) 14-22.
3. R.Z. Xu, D.R. Ni, Q. Yang, C.Z. Liu, Z.Y. Ma*, Influence of Zn coating on the friction stir spot welded magnesium-aluminum joint, Sci. Technol. Weld. Join., 22, 6 (2017) 512–519.
4. Y.L. Qin, Z. Sun, W.W. Zhao, Z.Y. Liu, D.R. Ni*, Z.Y. Ma*, Improved photocatalytic properties of ZnS/RGO nanocomposites prepared with GO solution in degrading methyl orange, Nano-Structures & Nano-Objects, 10 (2017) 176–181.
5. Y.L. Qin, Z. Sun, Z.Y. Liu, D.R. Ni*, Z.Y. Ma*, Effect of S2- donors on synthesizing and photocatalytic degrading properties of ZnS/RGO nanocomposite, Appl. Phys. A, 123, 5 (2017) 355
6. F. Mokdad, D.L. Chen, Z.Y. Liu, D.R. Ni, B.L. Xiao, Z.Y. Ma*, Three-dimensional processing maps and microstructural evolution of a CNT-reinforced Al-Cu-Mg nanocomposite, Mater. Sci. Eng. A, 702 (2017) 425-437.
7. F. Mokdad, D.L. Chen*, Z.Y. Liu, D.R. Ni, B.L. Xiao, Z.Y. Ma*, Hot deformation and activation energy of a CNT-reinforced aluminum matrix nanocomposite, Mater. Sci. Eng. A, 695 (2017) 322–331.
8. K. Zhao, Z.Y. Liu, B.L. Xiao, D.R. Ni, Z.Y. Ma*, Origin of insignificant strengthening effect of CNTs in T6-treated CNT/6061Al composites, Acta Metall. Sinica – Eng. Lett, in press.
2016年：
9. D.R. Ni, J.J. Wang, Z.Y. Ma*, Shape memory effect, thermal expansion and damping property of friction stir processed NiTip/Al composite, J. Mater. Sci. Technol. 32 (2016) 162-166.
10. R.Z. Xu, D.R. Ni, Q. Yang, C.Z. Liu, Z.Y. Ma*, Pinless friction stir spot welding of Mg-3Al-1Zn alloy with Zn interlayer, J. Mater. Sci. Technol. 32 (2016) 76-88.
11. F. Mokdad, D.L. Chen*, Z.Y. Liu, B.L. Xiao, D.R. Ni, Z.Y. Ma*, Deformation and strengthening mechanisms of a carbon nanotube reinforced aluminum composite, Carbon, 104 (2016) 64-77.
12. F.A. Mirza, K. Wang, S.D. Bhole, J. Friedman, D.L. Chen*, Z.Y. Liu, D.R. Ni, B.L. Xiao, Z.Y. Ma*, Strain-controlled low cycle fatigue properties of a rare-earth containning ME20 magnesium alloy, Mater Sci. Eng. A, 661 (2016) 115-125.
13. X.Y. Liu, W.G. Wang, D. Wang, D.R. Ni, L.Q. Chen, Z.Y. Ma*, Effect of nanometer TiC coated diamond on the strength and thermal conductivity of diamond/Al composites, Mater. Chem. Phy. 182 (2016) 256-262.
14. Q.N. Song*, Y.F. Bao, Y.F. Jiang, Y.G. Zheng, D.R. Ni, Z.Y. Ma, Corrosion and Cavitation Erosion Behaviors of the Thermo-Mechanically Affected Zone (TMAZ) in a Friction Stir Processed Ni-Al Bronze, Corrosion, 72, 11 (2017) 1438-1444.
15. H. Zhang, D. Wang, P. Xue, L.H. Wu, D.R. Ni, Z.Y. Ma*, Microstructural evolution and pitting corrosion behavior of friction stir welded joint of high nitrogen stainless steel, Mater. Design. 110 (2016) 802-810.
2015年：
16. R.Z. Xu, D.R. Ni, Q. Yang, C.Z. Liu, Z.Y. Ma*, Influence of Zn interlayer addition on microstructure and mechanical properties of friction stir welded AZ31 Mg alloy, J. Mater. Sci. 50 (2015) 4160-4173.
17. R.Z. Xu, D.R. Ni, Q. Yang, C.Z. Liu, Z.Y. Ma*, Influencing mechanism of Zn interlayer addition on hook defects of friction stir spot welded Mg-Al-Zn alloy joints, Mater. Design, 69 (2015) 163–169.
18. X.X. Zhang, D.R. Ni, B.L. Xiao, H. Andr？, W.M. Gan, M. Hofmann, Z.Y. Ma*, Determination of macroscopic and microscopic residual stresses in friction stir welded metal matrix composites via neutron diffraction, Acta Mater. 87 (2015) 161-173.
19. F. Yang, D.R. Ni, S.J. Hao, S.R. Li, Z.Y. Ma, Y.N. Liu, C. Feng, L.S. Cui*, Microstructure and phase stress partition of Mo fiber reinforced CuZnAl composite, Mater. Sci. Eng. A, 628 (2015) 419-422.
20. Q.N. Song, Y.G. Zheng*, D.R. Ni, Z.Y. Ma, Characterization of the corrosion product films formed on the as-cast and friction-stir processed Ni-Al bronze in a 3.5 wt% NaCl solution, Corrosion, 71 (2015) 606-614.
21. Q.N. Song, Y.G. Zheng*, D.R. Ni, Z.Y. Ma, Studies of the nobility of phases using scanning Kelvin probe microscopy and its relationship to corrosion behaviour of Ni–Al bronze in chloride media, Corros. Sci. 92 (2015) 95-103.
22. L.H. Wu, B.L. Xiao, D.R. Ni, Z.Y. Ma*, X.H. Li, M.J. Fu, Y.S. Zeng, Achieving superior superplasticity from lamellar microstructure of nugget in a friction stir welded Ti-6Al-4V joint, Scripta Mater. 98 (2015) 44-47.
23. M.J. Luk, F.A. Mirza and D.L. Chen*, D.R. Ni, B.L. Xiao, Z.Y. Ma*, Low cycle fatigue of SiCp reinforced AA2009 composites, Mater. Design, 66 (2015) 274-283.
24. V.K. Patel, S.D. Bhole, D.L. Chen*, D.R. Ni, B.L. Xiao, Z.Y. Ma*, Solid-state ultrasonic spot welding of SiCp/2009Al composite sheets, Mater. Design, 65 (2015) 489-495.
25. 杨超, 王继杰, 马宗义, 倪丁瑞*, 付明杰, 李晓华, 曾元松, 7B04铝合金薄板的搅拌摩擦焊接及接头低温超塑性研究, 金属学报, 51 (2015) 1449-1456.
2014年：
26. D.R. Ni, Z.Y. Ma*, Shape memory alloy reinforced metal matrix composites: a review, Acta Metall. Sinica – Eng. Lett. 27, 5 (2014) 739-761.
27. D.R. Ni, D.L. Chen, D. Wang, B.L. Xiao, Z.Y. Ma*, Tensile properties and strain-hardening behaviour of friction stir welded SiCp/AA2009 composite joints, Mater. Sci. Eng. A, 608 (2014) 1-10.
28. D.R. Ni, D.L. Chen, J. Yang, Z.Y. Ma*, Low cycle fatigue properties of friction stir welded joints of a semi-solid processed AZ91D magnesium alloy, Mater. Design, 56 (2014) 1-8.
29. D.R. Ni, J.J. Wang, Z.N. Zhou, Z.Y. Ma*, Fabrication and mechanical properties of bulk NiTip/Al composites prepared by friction stir processing, J. Alloy. Compd. 586 (2014) 368-374.
30. G.R. Cui, D.R. Ni, Z.Y. Ma*, S.X. Li, Effects of friction stir processing parameters and in situ passes on microstructure and tensile properties of Al-Si-Mg casting, Metall. Mater. Trans. A, 45 (2014) 5318-5331.
31. D. Wang, D.R. Ni, B.L. Xiao, Z.Y. Ma*, W. Wang, K. Yang, Microstructural evolution and mechanical properties of friction stir welded joint of Fe-Cr-Mn-Mo-N austenite stainless steel, Mater. Design, 64 (2014) 355-359.
32. J. Yang, D.R. Ni, D. Wang, B.L. Xiao, Z.Y. Ma*, Friction stir welding of as-extruded Mg-Al-Zn alloy with higher Al content. Part I: Formation of banded and line structures, Mater. Charact. 96 (2014) 142-150.
33. J. Yang, D.R. Ni, D. Wang, B.L. Xiao, Z.Y. Ma*, Friction stir welding of as-extruded Mg-Al-Zn alloy with higher Al content. Part II: Influence of precipitates, Mater. Charact. 96 (2014) 135-141.
34. J. Yang, D.R. Ni, D. Wang, B.L. Xiao, Z.Y. Ma*, Strain-controlled low-cycle fatigue behavior of friction stir welded AZ31 magnesium alloy, Metall. Mater. Trans. A, 45 (2014) 2101-2115.
35. D. Wang, B.L. Xiao, D.R. Ni, Z.Y. Ma*, Friction stir welding of discontinuously reinforced aluminum matrix composites – a review, Acta Metall. Sinica – Eng. Lett. 27 (2014) 816-824.
36. Y. Tao, Z. Zhang, D.R. Ni, D. Wang, B.L. Xiao, Z.Y. Ma*, Influence of welding parameter on mechanical properties and fracture behavior of friction stir welded Al-Mg-Sc joints, Mater. Sci. Eng. A, 612 (2014) 236-245.
37. Q.N. Song, Y.G. Zheng*, D.R. Ni, Z.Y. Ma, Corrosion and cavitation erosion behaviors of friction stir processed Ni-Al bronze: effect of processing parameters and position in the stirred zone, Corrosion, 70 (2014) 261-270.
38. J. Yang, D.R. Ni, B.L. Xiao, Z.Y. Ma*, Non-uniform deformation in a friction stir welded Mg-Al-Zn joint during stress fatigue, Int. J. Fatigue, 59 (2014) 9-13.
2013年：
39. D.R. Ni, D.L. Chen, B.L. Xiao, D. Wang, Z.Y. Ma*, Residual stresses and high cycle fatigue properties of friction stir welded SiCp/AA2009 composites, Int. J. Fatigue, 55 (2013) 64-73.
40. D.R. Ni, D.L. Chen, D. Wang, B.L. Xiao, Z.Y. Ma*, Influence of microstructural evolution on tensile properties of friction stir welded joint of rolled SiCp/AA2009-T351 sheet, Mater. Design, 51 (2013) 199-205.
41. H.L. Hao, D.R. Ni, Z. Zhang, D. Wang, B.L. Xiao, Z.Y. Ma*, Microstructure and mechanical properties of Al–Mg–Er sheets jointed by friction stir welding, Mater. Design, 52 (2013) 706-712.
42. H.L. Hao, D.R. Ni, Z. Zhang, D. Wang, B.L. Xiao, Z.Y. Ma*, Effect of welding parameters on microstructure and mechanical properties of friction stir welded Al-Mg-Er alloy, Mater. Sci. Eng. A, 559 (2013) 889-896.
43. J. Yang, D. Wang, B.L. Xiao, D.R. Ni, Z.Y. Ma*, Effect of rotation rates on microstructure, mechanical properties and fracture behavior of friction stir welded AZ31 magnesium alloy, Metall. Mater. Trans. A, 44A, 1 (2013) 517-530.
44. Q.N. Song, Y.G. Zheng*, S.L. Jiang, D.R. Ni, Z.Y. Ma, Comparison of corrosion and cavitation erosion behaviors between the as-cast and friction-stir-processed nickel aluminum bronze, Corrosion, 69 (2013) 1111-1121.
已授权专利：
1. 倪丁瑞、马宗义、肖伯律、王继杰，一种表面/块体金属基复合材料及其制备方法专利号：ZL200910248824，授权公告日：2011.6.29。
2. 倪丁瑞、徐荣正、马宗义，一种消除镁合金搅拌摩擦搭接接头钩状缺陷的焊接方法 ，专利号：ZL201310640083.6，授权公告日：2017.03.15。
3. 倪丁瑞、马宗义、肖伯律、王东、王全兆，一种提高齿轮齿条使用寿命的短流程塑性加工方法，专利号：ZL201010604634，授权公告日：2014.03.26。
4. 倪丁瑞、马宗义、肖伯律、王东、王全兆，一种提高锯条使用寿命的短流程塑性加工方法，专利号：ZL201010604760，授权公告日：2012.11.14。
5. 马宗义、倪丁瑞、薛鹏、肖伯律，一种改善铝铜异质金属连接强度的搅拌摩擦焊接方法，专利号：ZL200810230080，授权公告日：2012.01.11。
6. 杨峰、倪丁瑞、马宗义、崔立山，Mo微纳米线/CuZnAl记忆合金复合材料及其制备方法，专利号：ZL201310251810，授权公告日：2013.9.25。（金属所为第二单位，第一单位中国石油大学，北京）
7. 王东、王全兆、肖伯律、倪丁瑞、 马宗义，一种不连续增强铝基复合材料薄壁管材的制备工艺 ，专利号：201210549899，授权公告日：2016.01.06。
8. 肖伯律、刘振宇、马宗义、王全兆、倪丁瑞、王东，一种碳纳米管增强金属基复合材料的制备方法，专利号：ZL201110230568.9，授权公告日：2014.9.10。
|
声明：本网部分文章和图片来源于网络，发布的文章仅用于材料专业知识和市场资讯的交流与分享，不用于任何商业目的。任何个人或组织若对文章版权或其内容的真实性、准确性存有疑义，请第一时间联系我们，我们将及时进行处理。
|
发表于 2020-8-28 15:14:31
QQ好友和群
QQ空间
腾讯微博
腾讯朋友
收藏
转播
分享
淘帖
楼主